A premium green floor polish designed specifically for ease of application and ease of maintenance while consistently providing a beautiful, durable and safe wet look shine.
Recomended Floor Surfaces:
Vinyl composition tile ("VCT"), Linoleum, Marmoleum and hard floor surfaces.
Directions for use: INITIAL APPLICATION
1. Remove old polish and sealer.
2. Neutralize floor using a neutral cleaner or EnviroStar Green™ All Purpose Neutralizer.
3. Rinse floor again with clean, cold water and allow to dry. OPTIONAL: Apply 2 thin coats of EnviroStar Green Floor Sealer to protect high traffic areas and old or porous floors.
4. Apply 4-6 coats of EnviroStar Green Floor Polish with a clean, synthetic mop.
5. Allow floor to dry thoroughly between coats and prior to burnishing. NOTE: Do not exceed an initial application of a combined 6 coats of polish and sealer. To prevent contamination, do not pour unused product from bucket into original container.
Directions for use: ROUTINE MAINTENANCE
1. Sweep floor daily with a dust mop.
2. To clean floor use mop or scrubber with neutral cleaner.
3. As needed, restore shine with floor maintainer, no more than twice per week.
4. Burnish as desired with ultra high speed machine and pad.
5. As needed, perform a deep scrub and re-coat applying an additional 1-2 coats of EnviroStar Green Floor Polish.
6. Allow floor to dry thoroughly between coats and prior to burnishing.
7. Strip floor when desired results cannot be achieved with routine maintenance.
EnviroStar Green Floor Polish Material Safety Data Sheet
EnviroStar Green Floor Polish Product Data Sheet
