Pioneer Eclipse Penetrating Floor Sealer (4 Litres)

Catalogue code:426MP

Pioneer Eclipse Penetrating Floor Sealer

£65.27 +VAT
£78.32 Inc VAT

Order Before 4pm For Next Working Day Delivery

Eclipse Penetrating Floor Sealer is transparent water based sealer that provides a durable, non-film-forming, continuous protective barrier on porous surfaces. It provides excellent oil and water repellence, resists staining and etching and is easier to clean and maintain than unsealed surfaces.

FEATURES

  • Ready-to-use
  • Great for indoor or outdoor use
  • Keeps surfaces looking clean and stain-free
  • Easy application with a pump-up sprayer

RECOMMENDED APPLICATIONS

  • Porous surfaces such as concrete, natural stone, brick, unglazed ceramic tile and grout.

Coverage (Using pump-up sprayer)

  • 150-300 ft2 per gal (4-7 m2 per litre) for medium to high porosity floors
  • 500-1000 ft2 per gal (12-24 m2 per litre) for low porosity floors

Eclipse Penetrating Sealer Put To The Test

Concrete floor test before cleaning

Concrete Stain Protection
Left side treated with Eclipse Penetrating Sealer, right side untreated.

Contaminants applied to both treated and untreated concrete simultaneously.

Untreated concrete showed significant staining in just 30 minutes

Easy to Clean

Chemical free stone floor care

Left side treated with Eclipse Penetrating Sealer, right side untreated.

Contaminants applied to both treated and untreated concrete simultaneously.

Image shows results of water-only cleanup and air dried for two hours.

Directions for use:

Read all directions and Safety Data Sheets (SDS) before using.
Penetrating Sealer is ready-to-use. Do NOT dilute.

  1. Clean floor. If heavily soiled, clean with a degreaser.
  2. Rinse floor thoroughly with water and allow to dry completely.
  3. Fill pump-up sprayer with Penetrating Sealer to provide coverage of 50-250 ft2 per gal (1-6 m2 per litre) for medium to high porosity floors or 500-1000 ft2 per gal (12-24 m2 per litre) for low porosity floors.
  4. Spray floor completely with the spray head set to a medium spray. Do not apply solution so heavily that puddles are formed.
  5. Highly porous surfaces such as concrete require a second treatment which may be applied after the first treatment is dry (15-30 minutes).
  6. Maintain with a neutral all-purpose cleaner.

NOTE: If desired, remove dried, excess sealer with sponge, squeegee, or auto scrubber.

Description: Hard Floor Penetrating Sealer.
Appearance: Clear, straw colored liquid
Flash Point
ASTM D56-05 (2010):
>200ºF (93ºC)
Coverage Rate*: 50 to 250 ft2²/gal
4 to 20 m²/liter
Dry Time: 15 - 30 minutes
pH
ASTM E70-07:
9.6
Fragrance: No added fragrance
Density
ASTM D1475-98 (2008):
8.4 lb/gal @ 68°F
1.01 kg/L @ 20°C
Detergent Resistence
ASTM D3207-92 (2008):
Excellent
Freeze/Thaw
ASTM D3209-93 (2008):
Passes 3 cycles

*Coverage is approximate and may vary depending on surface finish/texture, concrete condition, climatic conditions, etc.

Brands